From f0e669eed401213a5b83fbe5397b1c8932b3813c Mon Sep 17 00:00:00 2001 From: Paul Walko Date: Fri, 13 Oct 2023 15:29:44 -0400 Subject: [PATCH] remove smb --- ansible/files/lech/smb.conf | 226 ------------------------------------ ansible/main.yml | 22 +--- 2 files changed, 4 insertions(+), 244 deletions(-) delete mode 100644 ansible/files/lech/smb.conf diff --git a/ansible/files/lech/smb.conf b/ansible/files/lech/smb.conf deleted file mode 100644 index 5286842..0000000 --- a/ansible/files/lech/smb.conf +++ /dev/null @@ -1,226 +0,0 @@ -# -# Sample configuration file for the Samba suite for Debian GNU/Linux. -# -# -# This is the main Samba configuration file. You should read the -# smb.conf(5) manual page in order to understand the options listed -# here. Samba has a huge number of configurable options most of which -# are not shown in this example -# -# Some options that are often worth tuning have been included as -# commented-out examples in this file. -# - When such options are commented with ";", the proposed setting -# differs from the default Samba behaviour -# - When commented with "#", the proposed setting is the default -# behaviour of Samba but the option is considered important -# enough to be mentioned here -# -# NOTE: Whenever you modify this file you should run the command -# "testparm" to check that you have not made any basic syntactic -# errors. - -#======================= Global Settings ======================= - -[global] -smb ports = 4445 -client min protocol = SMB3_11 - -## Browsing/Identification ### - -# Change this to the workgroup/NT-domain name your Samba server will part of - workgroup = PEWWG - -#### Networking #### - -# The specific set of interfaces / networks to bind to -# This can be either the interface name or an IP address/netmask; -# interface names are normally preferred -; interfaces = 127.0.0.0/8 eth0 -interfaces = 64.112.38.10/30 eno1 - -# Only bind to the named interfaces and/or networks; you must use the -# 'interfaces' option above to use this. -# It is recommended that you enable this feature if your Samba machine is -# not protected by a firewall or is a firewall itself. However, this -# option cannot handle dynamic or non-broadcast interfaces correctly. -; bind interfaces only = yes - - - -#### Debugging/Accounting #### - -# This tells Samba to use a separate log file for each machine -# that connects - log file = /var/log/samba/log.%m - -# Cap the size of the individual log files (in KiB). - max log size = 1000 - -# We want Samba to only log to /var/log/samba/log.{smbd,nmbd}. -# Append syslog@1 if you want important messages to be sent to syslog too. - logging = file - -# Do something sensible when Samba crashes: mail the admin a backtrace - panic action = /usr/share/samba/panic-action %d - - -####### Authentication ####### - -# Server role. Defines in which mode Samba will operate. Possible -# values are "standalone server", "member server", "classic primary -# domain controller", "classic backup domain controller", "active -# directory domain controller". -# -# Most people will want "standalone server" or "member server". -# Running as "active directory domain controller" will require first -# running "samba-tool domain provision" to wipe databases and create a -# new domain. - server role = standalone server - - obey pam restrictions = yes - -# This boolean parameter controls whether Samba attempts to sync the Unix -# password with the SMB password when the encrypted SMB password in the -# passdb is changed. - unix password sync = yes - -# For Unix password sync to work on a Debian GNU/Linux system, the following -# parameters must be set (thanks to Ian Kahan < for -# sending the correct chat script for the passwd program in Debian Sarge). - passwd program = /usr/bin/passwd %u - passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . - -# This boolean controls whether PAM will be used for password changes -# when requested by an SMB client instead of the program listed in -# 'passwd program'. The default is 'no'. - pam password change = yes - -# This option controls how unsuccessful authentication attempts are mapped -# to anonymous connections - map to guest = bad user - -########## Domains ########### - -# -# The following settings only takes effect if 'server role = classic -# primary domain controller', 'server role = classic backup domain controller' -# or 'domain logons' is set -# - -# It specifies the location of the user's -# profile directory from the client point of view) The following -# required a [profiles] share to be setup on the samba server (see -# below) -; logon path = \\%N\profiles\%U -# Another common choice is storing the profile in the user's home directory -# (this is Samba's default) -# logon path = \\%N\%U\profile - -# The following setting only takes effect if 'domain logons' is set -# It specifies the location of a user's home directory (from the client -# point of view) -; logon drive = H: -# logon home = \\%N\%U - -# The following setting only takes effect if 'domain logons' is set -# It specifies the script to run during logon. The script must be stored -# in the [netlogon] share -# NOTE: Must be store in 'DOS' file format convention -; logon script = logon.cmd - -# This allows Unix users to be created on the domain controller via the SAMR -# RPC pipe. The example command creates a user account with a disabled Unix -# password; please adapt to your needs -; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u - -# This allows machine accounts to be created on the domain controller via the -# SAMR RPC pipe. -# The following assumes a "machines" group exists on the system -; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u - -# This allows Unix groups to be created on the domain controller via the SAMR -# RPC pipe. -; add group script = /usr/sbin/addgroup --force-badname %g - -############ Misc ############ - -# Using the following line enables you to customise your configuration -# on a per machine basis. The %m gets replaced with the netbios name -# of the machine that is connecting -; include = /home/samba/etc/smb.conf.%m - -# Some defaults for winbind (make sure you're not using the ranges -# for something else.) -; idmap config * : backend = tdb -; idmap config * : range = 3000-7999 -; idmap config YOURDOMAINHERE : backend = tdb -; idmap config YOURDOMAINHERE : range = 100000-999999 -; template shell = /bin/bash - -# Setup usershare options to enable non-root users to share folders -# with the net usershare command. - -# Maximum number of usershare. 0 means that usershare is disabled. -# usershare max shares = 100 - -# Allow users who've been granted usershare privileges to create -# public shares, not just authenticated ones - usershare allow guests = yes - -#======================= Share Definitions ======================= - -[pew-photos] - comment = pew's photos - browseable = yes - path = /mammoth/tmp/pew-photos - guest ok = no - read only = yes - create mask = 0644 - directory mask = 0755 - valid users = paul - -# Un-comment the following and create the netlogon directory for Domain Logons -# (you need to configure Samba to act as a domain controller too.) -;[netlogon] -; comment = Network Logon Service -; path = /home/samba/netlogon -; guest ok = yes -; read only = yes - -# Un-comment the following and create the profiles directory to store -# users profiles (see the "logon path" option above) -# (you need to configure Samba to act as a domain controller too.) -# The path below should be writable by all users so that their -# profile directory may be created the first time they log on -;[profiles] -; comment = Users profiles -; path = /home/samba/profiles -; guest ok = no -; browseable = no -; create mask = 0600 -; directory mask = 0700 - -;[printers] -; comment = All Printers -; browseable = no -; path = /var/spool/samba -; printable = yes -; guest ok = no -; read only = yes -; create mask = 0700 - -# Windows clients look for this share name as a source of downloadable -# printer drivers -;[print$] -; comment = Printer Drivers -; path = /var/lib/samba/printers -; browseable = yes -; read only = yes -; guest ok = no -# Uncomment to allow remote administration of Windows print drivers. -# You may need to replace 'lpadmin' with the name of the group your -# admin users are members of. -# Please note that you also need to set appropriate Unix permissions -# to the drivers directory for these users to have write rights in it -; write list = root, @lpadmin - diff --git a/ansible/main.yml b/ansible/main.yml index 348581a..2b19339 100644 --- a/ansible/main.yml +++ b/ansible/main.yml @@ -189,23 +189,6 @@ force_apt_get: yes update_cache: yes - - name: Create samba dir - file: - path: /mammoth/tmp/pew-photos - state: directory - owner: paul - group: paul - notify: Restart smbd - - - name: Configure samba - copy: - src: files/lech/smb.conf - dest: /etc/samba/smb.conf - owner: root - group: root - mode: '0644' - notify: Restart smbd - - name: Configure zfs-zed copy: src: files/zed.rc @@ -266,4 +249,7 @@ - preview_cards - debug: - msg: Manually install nvidia drivers and container toolkit + msg: Manually install nvidia drivers and container toolkit + + - debug: + msg: Manually install tailscale